□ Our correspondent Fu Jin

　　On the morning of June 5th, the first public interest litigation case of air pollution filed by the procuratorate in Beijing was pronounced in the first instance of Beijing No.4 Intermediate People’s Court. The defendant Beijing Colorful Lianyi International Steel Structure Engineering Co., Ltd. was ordered to pay compensation of more than 894,000 yuan according to law for the protection, restoration and governance of the ecological environment. At the same time, it is forbidden to engage in related processing and production activities in the original production base before it is proved that effective environmental protection measures are taken to continue production in line with environmental protection standards.

　　According to the prosecution of the fourth branch of Beijing Municipal People’s Procuratorate, the prosecutor of public interest litigation, Colorful Company is an enterprise mainly engaged in steel structure processing. The company produced a large amount of volatile organic compounds (VOCs) waste gas during the painting process of steel structure processing, and did not paint in a closed space or equipment according to the law, nor did it install or use pollution prevention facilities or take measures to reduce waste gas emissions, resulting in the direct discharge of VOCs waste gas from painting into the atmosphere, which caused environmental pollution and infringed on social public interests. It is required to order Multicolor Company to stop infringing on the atmospheric environment, compensate 894,880 yuan for the damage to the ecological environment, publicly apologize to the public in the media at or above the provincial level, and bear the appraisal fee of 33,000 yuan.

　　After hearing the case, Beijing No.4 Intermediate People’s Court supported all four claims of the public interest litigation plaintiff, and ordered Colorful Company not to engage in steel structure processing and production activities involving painting, welding, etc., which produced paint mist and organic waste gas, until it was proved that effective environmental protection measures were taken to continue production in line with environmental protection standards, and at the same time compensated 894,880 yuan for the ecological environment damage caused by its actions, which was specially used for ecological environment protection, restoration and governance.

　　After the verdict, the litigation agent of Colorful Company said that at present, the factory building of Colorful Company has been demolished, the equipment has been removed and the workers have been laid off, and there is no plan to continue production at present.

　　According to Sun Li, president of Beijing No.4 Intermediate People’s Court, since 2015, Beijing No.4 Intermediate People’s Court has accepted a total of 16 cases of environmental civil public interest litigation, including 13 cases filed by social organizations and 3 cases filed by procuratorial organs. Judging from the trial process, environmental civil public interest litigation cases have the following characteristics: First, the types of cases are constantly enriched, including solid waste pollution, soil pollution, water pollution, campus environmental pollution, gas pollution from production and other disputes. Second, new types of cases are constantly emerging. For example, the public interest litigation case sued by Chongqing Green Volunteers Association accepted by the hospital involves the impact of disposable chopsticks, plastic products and take-away garbage on the Internet take-away platform on the ecological environment, which reflects the new requirements of environmental protection brought about by the development of Internet services and consumption transformation.

　　At the same time, in the trial of environmental civil public interest litigation cases, environmental appraisal has become a key link, in which the fact of destroying the ecology and polluting the environment, the damage consequences and compensation caused to the ecological environment and social public interests, and the restoration scheme or alternative restoration scheme for the ecological environment are the main aspects of appraisal, which are highly complex and professional.

　　The reporter learned that in view of the above-mentioned new characteristics of environmental public interest litigation, Beijing No.4 Intermediate People’s Court has established a "green public interest litigation channel connecting legislation, trial and enforcement" and adopted the "four synchronization" measures of environmental public interest litigation, that is, the case materials are transferred to the trial court simultaneously after the case is filed, so that the trial court can know the case from the plaintiff according to the case situation and take corresponding environmental protection measures in time; Announce the acceptance of environmental cases to the public and inform social organizations that they can participate in or support environmental public interest litigation; Issue a notice of public interest litigation to the administrative department simultaneously after filing the case, and urge the administrative department to take measures; After the case was filed, the preservation measures were taken simultaneously. The presiding judge went to the scene for investigation at the first time to preserve environmental evidence, and at the same time, property preservation and behavior preservation were taken according to law to prevent environmental damage from expanding.

　　Cartography/Li Xiaojun　　

Graduation season is coming.

Recently, the Ministry of Education organized

"College graduates in 2023.

Employment and Entrepreneurship Policy Publicity Month "

A total of 1866 policies at all levels were collected.

What policies are there to promote employment?

Let’s watch ↓ ↓ ↓

01 national policy

one

Enterprises have subsidies to absorb graduates.

Enterprises employ unemployed college graduates in the graduation year or within 2 years after leaving school, and registered unemployed 16-mdash; 24-year-old youth can enjoy a one-time employment subsidy.

Shanghai provides a subsidy of 2,000 yuan/person to employers who recruit the 2023 college graduates.

Guangdong province gives employment subsidies to start-ups that attract college graduates. Those who employ 3 people (including 3 people) or less will be subsidized according to the standard of 2000 yuan per person; Recruiting more than 3 people will be given a subsidy of 3000 yuan for each additional person.

On the Employment and Entrepreneurship of College Graduates

And these policies ↓ ↓ ↓

2

After the expiration of the service at the grassroots level, you can enjoy policies such as special recruitment.

College graduates can participate in the "three supports and one support" plan, the "special post plan" for rural teachers, and the plan for college students to volunteer for the western region. After the service expires, they can enjoy policies such as extra points for postgraduate entrance examination, targeted recruitment of civil servants, and special recruitment of public institutions.

Henan provides a living allowance of up to 2,700 yuan/month to volunteers who participate in the rural revitalization plan.

Guangxi’s living allowance standard for "three supports and one support" personnel is 36,000 yuan per person per year. Those who meet the requirements will enjoy a one-time resettlement fee of 0.3 million yuan, and will be given subsidies for hard areas and township work.

three

Increase the amount of self-employment loans

College graduates can apply for a business guarantee loan of up to 200,000 yuan for their own business, and the loan amount can be appropriately increased if they start a business in partnership.

Heilongjiang has raised the maximum loan amount to 3 million yuan for qualified small and micro enterprises established by college graduates.

In Anhui, if college graduates who have graduated within 2 years set up small and micro enterprises for the first time and have been operating normally for more than 3 months, the employment subsidy fund will give them a one-time business start-up subsidy of not less than 5,000 yuan.

four

There are subsidies for participating in skills training.

The state implements youth-specific skills upgrading actions, and college graduates can participate in youth apprenticeship training, skills training and other training contents according to their own conditions to upgrade their technical skills, and enjoy vocational training subsidies according to regulations.

The Ministry of Education implemented the "Central Special Lottery Public Welfare Fund Hongzhi Navigation Aid Plan" to carry out online and offline centralized training.

five

Join the army and enjoy the "four priorities" policy.

College graduates who enlist for compulsory military service enjoy the priority of registration, medical examination and political examination, examination and approval, and the priority of using the "four priorities" policy.

six

Who can apply for employment internship?

The state has implemented a plan to raise millions of employment trainee positions, and college graduates who have not been employed within 2 years of leaving school, 16-mdash; The 24-year-old unemployed youth can take part in 3-12 months’ employment probation, carry out post practice training, and be given basic living expenses by the probation unit to handle personal accident insurance.

Shanxi has implemented the "30,000 Employment Probation Post Recruitment Plan", and all the business handling such as employment probation post declaration, internship application, supply and demand docking, subsidy application, etc. have been realized through the "public service platform integrating people and society".

Gansu implemented the "Million Employment Trainees Recruitment Plan" and recruited a large number of trainees. For employers who provide internship positions, internship subsidies ranging from 1,200 yuan to 1,500 yuan per month will be implemented according to the policy.

seven

Poke the link to get employment service help

Unemployed college graduates can get help from public employment services through the following platform websites.

For recruitment information, you can log in:

Ministry of Education National Employment Service Platform for College Students

Official website, Ministry of Human Resources and Social Security

National recruitment platform

Zhongzhi recruitment platform

China human resources market network

China Public Recruitment Network

Employment service platform for college graduates

new jdbs

"Employment Online"

Tuantuan micro-employment

eight

No longer issue "employment registration card"

From 2023, the "employment registration card" will no longer be issued, and the employment registration card will no longer be used as a necessary material for handling the procedures of college graduates’ recruitment, settlement, and file reception and transfer.

02 local policies

Local governments have also introduced employment and entrepreneurship policies.

Graduates can log in

National employment service platform for college students

"College graduates in 2023.

Employment and Entrepreneurship Policy Publicity Month "column

View relevant policies

03 employment trap needs to be guarded against

Five precautions for job hunting

Yifanghei intermediary

Second, prevent arbitrary charges

Sanfang training loan

Four-prevention paid practice

Five prevention of illegal pyramid schemes

"three essentials" for job hunting

First, we must enhance our awareness of job security.

Second, we must use formal job search channels.

Third, we should use laws to safeguard employment rights and interests.

When applying for a job, you can go to the job fair in colleges and universities, local public employment talent service institutions, or honest and standardized business human resources service institutions to apply for a job.

After finding the information about the intended job, communicate with relatives and friends with certain social experience, and listen to their opinions or work experience in related fields calmly.

After receiving the recruitment invitation, check the relevant information online in time, especially to check the registration or filing of the employer on the official website of the market supervision department. If the relevant information is not found, it means that the unit may not exist.

If you encounter a job trap, please immediately complain to the human resources and social security department.

If personal safety is threatened, please call the police immediately.

Bless every graduate.

The job search is smooth and the future is bright

Producer Tang Yi

Producer Yi Fang Yi Ting Wen Fan

Planning Rongmengyan

Editor Sun Linxuan

　　　 [XCAR overseas new car original]

　　　　Recently, Ducati officially released the Scrambler model at the Cologne International Motorcycle Show, with four models, namely Icon, Urban Enduro, Full Throttle and Classic. It is expected that the Scrambler model will be officially imported into the domestic market at the end of 2015.

　　　 Tip: A total of four models have been launched; 803cc air-oil cooled L-type twin-cylinder engine; It was officially imported into China at the end of autumn 2015.

[Ducati Scrambler Release Site]

　　　　Ducati Scrambler is a motorcycle full of modern style. Many traditional materials have been tried, such as aluminum alloy rear rocker arm, engine cover and steel drop-shaped fuel tank. At the same time, new materials and technologies have been adopted, such as front and rear LED light groups and LCD instrument display screen.

[Sketch of Scrambler Design in Ducati]

　　　　The English name of Ducati scramble also has many similarities with the verb Scramble, which contains the meanings of mixing, blending, thinking freely and sharing with others.

　[Ducati Scrambler Full Throttle]

　　　　Scrambler adopts a wide handle and a seat with a moderate length, which ensures a relaxed and comfortable riding posture. The lightweight, low center of gravity body and wide tread pattern ensure riding comfort on the one hand and good passability on the other, so that drivers can enjoy driving on different roads. Scrambler uses a round classic headlight and a delicate fuel tank, and the running lights composed of surrounding LED light rings make it full of modern flavor.

[Scrambler Urban Enduro, Ducati]

[Ducati Scrambler Classic]

　　　　In terms of body color, the Icon car has two choices: red and yellow, and the body color of Urban Enduro is "wild green". Full Throttle is built for fans who like racing, and they have a strong pursuit of the ultimate. Classic is built for those who are faithful to the details and the appearance style of the 1970s. On the one hand, they want to enjoy pure driving pleasure, on the other hand, they have high requirements for the comfort of modern vehicles.

[Ducati Scrambler Icon]

[Ducati Scrambler Icon]

　　　　Ducati Scrambler is equipped with an 803cc air-oil cooled L-type twin-cylinder engine, with an inner diameter stroke ratio of 88:66, the highest power output of 75 HP and the peak torque of 68Nm. The engine performance has been readjusted to make its power output smooth at any speed.

[Ducati Scrambler Icon]

　　　　In addition, Ducati will soon launch a series of exclusive clothing and accessories, which will provide more choices for Scrambler’s further customization.

[Ducati Scrambler Full Throttle]

[Ducati Scrambler Full Throttle]

　　　　Claudio Domenicali, President of Ducati Global, stressed at the press conference: "Ducati has maintained a steady growth trend in the past few years. In the past 12 months, compared with the same period, we achieved a sales growth of 5%, which once again set a new sales record.

[Ducati will also release a series of exclusive costumes and modified parts]

　　　　Editor’s comment:In the German Super Motorcycle Competition just past, the driver of Ducati won the title of driver and the title of manufacturer respectively, which added to Ducati’s honor and created a good environment for the release of Scrambler. At present, there is almost one year before Scrambler’s entry into China, so Ducati fans can get their wallets ready.

　　　 Related content review:

　　　 Re-evolution: Ducati Chengdu Exhibition Hall is fully upgraded and opened.
　　　 http://info.xcar.com.cn/201409/news_1678410_1.html

After nine years, SAIC-GM officially changed coaches: On May 12th, SAIC-GM officially announced that Zhuang Jingxiong took over from Wang Yongqing as the general manager of SAIC-GM. On the occasion of great changes in the automobile industry, the future development and planning of SAIC-GM has once again become the focus of the whole industry.

Nine years ago, Wang Yongqing took over as the general manager of SAIC-GM, and SAIC-GM actively adjusted its marketing strategy. In 2016, its sales increased by 13.9%, and its three major brands sold 1.88 million vehicles throughout the year. In 2017, it sold more than 2 million vehicles-just 20 years after the establishment of SAIC-GM. In 2020, the cumulative production and sales will exceed 20 million vehicles.

Today, nine years later, the automobile consumption market has undergone a butterfly change. Since 2021, the new energy vehicle market has started in sturm und drang, and the independent brands have risen high in the lane-changing overtaking competition, and various capitals have poured in. On Brand Technology Day in the same year, SAIC-GM proposed electrification, intelligence and networking as the three fulcrums of sustainable development, and announced the planning and landing of three core products equipped with Ultium global electric vehicle platform, a new generation of VIP intelligent electronic architecture and Super Cruise super assisted driving system.

At the end of last year, SAIC-GM announced that it would continue to increase its strategic investment. It is planned that by 2025, the total investment in new technologies of electrification and intelligent networking will reach 70 billion yuan. According to the latest sales data, as of April this year, the wholesale volume of SAIC-GM was 80,000 vehicles, up 235.7% year-on-year and 27.4% quarter-on-quarter.

Some commentators believe that SAIC-GM came a little late on the new energy track. But looking at the road of enterprise development, we can see that the market has never been calm, and SAIC-GM has always been one step at a time. Behind the stability of the surface, it is years of continuous braving the wind and waves. Despite the unprecedented market pressure brought by the great changes in the industry, this veteran car company is still determined to work hard, make bold progress, mobilize all resources, grasp the strategic initiative of future development and invest in all-round transformation. In terms of technology landing, it pays more attention to steady and steady progress than blindly rushing to the beach market, and does not "compromise" for traffic and gimmicks.

In April this year, Chen Jining, secretary of the Municipal Party Committee, pointed out that the automobile industry is a pillar industry in Shanghai. As a leading enterprise in the industry, the innovation and transformation of SAIC is related to the high-quality economic development and the sustainable development of the automobile industry in the city. It is necessary to thoroughly study and implement the spirit of the important speeches made by the 20th Party Congress and the General Secretary of the Supreme Leader on his visit to Shanghai, earnestly enhance the sense of responsibility and urgency, firmly develop confidence and determination, and accelerate the innovation transformation with the spirit of self-revolution. The strategy should be clearer, the focus should be more prominent, the innovation should be more focused, and the reform should be more powerful, so as to make greater contributions to promoting high-quality development and enhancing the core competitiveness of Shanghai.

Therefore, the significance of this "coaching change" is not only the change of an automobile enterprise’s future planning, but also the implementation of the development requirements of the municipal party Committee and municipal government’s innovation breakthrough, compliance with industry changes and comprehensive changes in demand, self-innovation and higher quality supply.

As a predecessor, Wang Yongqing laid a solid foundation for the sustainable and high-quality development of SAIC-GM. As a pioneer, it remains to be seen how Zhuang Jingxiong will relay the road of transformation and realize the vision of "leading smart travel and achieving a better life".

SAIC-GM Wuhan Aoteneng Super Factory

Innovate technology and improve the system

Going to the forefront of electrification transformation

Just past the Shanghai Auto Show, referring to the current price war in the auto industry, Zhuang Jingxiong said: "What I want to see more is the value war, not the price war." He pointed out that the electrified track is like a marathon, and the start is only the beginning. If you want to really win, "we must compete for the ability of the whole system and the ability of research and development, and we must also compete for insight into long-term strategy."

To realize the "value war", the core still lies in technological innovation. In the process of accelerating the landing of electric intelligent networked automobile products, SAIC-GM has initially established new competitive advantages in various fields.

In terms of new energy technology, as the cornerstone of GM’s all-round electrification transformation, Otneng electric vehicle platform integrates GM’s 26 years of electrification experience and forward-looking technical advantages, bringing safer, smarter and more performance technical support for pure electric vehicles. SAIC-GM and Pan-Asia Automotive Technology Center, together with local suppliers, have developed a special battery formula for China market, which has the advantages of high thermal stability, low attenuation and long service life.

In terms of new energy system construction, SAIC-GM and Pan-Asia Automotive Technology Center participated in the simultaneous development of the Autoenergy platform and related vehicles, and the Pan-Asia New Energy Test Building and Guangde Battery Safety Laboratory can cover the main test and verification projects of the core three electrical components of new energy vehicles; In terms of manufacturing, following the opening of Shanghai Aoteneng Super Factory, Wuhan Aoteneng Super Factory has been officially put into production, further strengthening the new energy intelligent manufacturing capability; In terms of procurement, more than 95% of the spare parts of Autoenergy platform are locally purchased by using a highly localized business chain system. This means that SAIC-GM has a complete system capability of new energy from R&D, design, engineering, manufacturing to supply chain.

At present, Cadillac LYRIQ sharp song rear drive long battery life version and four-wheel drive performance version have been officially delivered. The Electra E5, Buick’s first Ultrapower platform model, was listed in Wuhan on April 13th, and it was also praised by the outside world as the first model in the joint venture to achieve "the same price of oil and electricity". From 2022 to 2025, the three major brands will have a total of 10 pure electric products.

Buick ELECTRA E5

On the basis of solid product development and quality, SAIC-GM continues to exert its strength in the after-sales service mode of new energy vehicles. Following the release of Cadillac LYRIQ sharp song, the brand launched Cadillac IQ pure electric space. Different from traditional 4S stores, IQ space is located in a prominent position in the business circle of mid-to-high-end large shopping centers, increasing the contact with users’ life scenes, from focusing on cars through professional stores in the past to focusing on users’ experience through life shopping scenes. At the same time, Cadillac launched Cadillac IQ App as the only channel to buy sharp songs, iterating the previous sales model of placing orders through dealers and agents.

This new customer-centered retail scene soon extended to other brands of SAIC-GM. At present, 20 Buick pure electric spaces have been opened in 13 major cities. More than 570 Buick pure electric zones have been opened, covering more than 225 cities. By the end of 2023, it is estimated that the number of Buick pure electric spaces will reach about 60, and the number of pure electric areas will exceed 600.

Aiming at the charging pain point of new energy vehicles, SAIC-GM has established a multi-level charging system: it is estimated that by the end of 2023, there will be more than 1,300 self-built charging terminals including Cadillac IQ exclusive overcharge station and Autoenergy overcharge station, and the number of third-party charging terminals cooperating with mainstream charging operators will reach 400,000, providing users with convenient one-stop charging service.

Cadillac pure electric IQ space

Intelligent networking continues to exert strength.

Promote digital transformation in all directions.

Today, a new generation of information technologies such as big data and artificial intelligence are booming, and the automobile industry has officially entered the era of "data determines experience and software defines cars". In order to realize all-round electrification transformation, comprehensively promoting digital transformation is the key to winning the future.

In November 2022, the Intelligent System and Software Engineering Center (ISSEC) of Pan-Asia Automotive Technology Center was established, focusing on five core areas: intelligent driving, intelligent cockpit, software-defined vehicle, electronic architecture and intelligent vehicle control, to ensure the landing and iterative update of GM’s latest intelligent networking technology.

At present, Pan Asia has nearly 1,300 software and digital talents, more than 10 development laboratories, nearly 1,000 test and verification platforms, 4 joint laboratories and 6 innovation studios.

? ?

? ?Pan-Asia Automotive Technology Center Intelligent System and Software Engineering Center (ISSEC)

Behind the large-scale investment of Pan-Asia Technology Center is the practice of SAIC-GM fully investing in digital transformation and accelerating intelligent networking. Specifically, the digital transformation of SAIC-GM is mainly manifested in the landing of three major technologies.

The first is the VIP intelligent electronic architecture. It is understood that 100% of the electric vehicles on the Aoteneng platform will adopt the VIP intelligent electronic architecture to realize the parallel refresh of OTA of multiple modules of the vehicle, with richer upgrade content and faster upgrade speed. In 2023, GM will launch a brand-new "Software-Defined Vehicle" platform in North America and China. Frequent OTA remote upgrades will bring technical solutions that are more suitable for China road conditions and travel scenarios.

The second is a new generation of Super Cruise super assisted driving system. In the field of intelligent driving, a new generation of Super Cruise super assisted driving system has been installed on Cadillac Ruige and will be gradually applied to future Buick and Chevrolet models.

It is understood that the new generation of Super Cruise has made nine major adjustments and optimizations for China road scenes and consumer driving habits on the basis of North America. The automatic lane change and command lane change functions bring an assisted driving experience close to the real driving style; High-precision maps provide data updates four times a year, and the mileage covered by domestic maps has increased by 50,000 kilometers compared with last year, reaching 350,000 kilometers.

In the future, Super Cruise will regularly carry out iterative upgrades through OTA to provide customers with richer usage scenarios. In addition, the intelligent lane centering assistance function makes driving in urban working conditions easier, and the upgraded parking assistance will also realize the function of remote parking in the future.

The third is a new generation of VCS intelligent cockpit system. At present, this cockpit system jointly developed by General Motors and Pan Asia Automotive Technology Center has been installed on Cadillac LYRIQ Ruige, Buick Century and E5. The system adopts the top hardware in the industry, including Qualcomm Snapdragon 8155 chip, super-large display screen with the highest 9K ultra-high definition, customized audio cooperated with top manufacturers such as AKG and BOSE, iKey mobile phone key, 5G communication module, etc., combined with intelligent scene engine and services provided by eco-partners in the industry, bringing personalized intelligent driving experience to consumers.

Starting from 2023, the VCS intelligent cockpit system will also launch a version equipped with Snapdragon 8195 chip and AR-HUD; Starting from 2024, the VCS intelligent cockpit will also welcome hardware upgrades such as rear entertainment system, four-tone voice command and exterior audio, and continue to introduce more ecological partners to further expand the functions and experiences of the cockpit.

Cadillac LYRIQ Ruige New Generation VCS Intelligent Cockpit System

Standing at the starting point of the new journey, observing the changes of SAIC-GM this year, we can see its status and actions:

Actively take scientific and technological innovation as the starting point, take digital transformation as the support, and further strengthen the determination of electronic transformation and upgrading. Under the trend of electrification, intelligence, networking and sharing, we will persist in taking users as the center and make efforts at both ends of supply and demand, and regard green and low-carbon transformation as the key to the future. I believe that in the future, SAIC-GM will continue to take the promotion of Shanghai’s high-quality development as its important mission and make positive contributions to enhancing the city’s core competitiveness.

　　[Global Network Reporter Zhao Yanlong] On Monday (28th) local time, the United States announced sanctions against Venezuelan state-owned oil companies, and CNN said on 28th that this brought the most significant financial pressure to the troubled Venezuelan President Nicolas Maduro Moros. In this regard, Maduro subsequently criticized that the US move was "immoral and illegal".

　　On Monday afternoon local time, U.S. Treasury Secretary Steve Mnuchin and National Security Advisor John Bolton announced in the White House press room that they were interested in the parent company of Citgo Oil Company — — Sanctions imposed by Petroleos de Venezuela,PdVSA). Bolton said that this measure will freeze the company’s assets of about 7 billion US dollars, and will lead to its asset loss of more than 11 billion US dollars in the coming year.

　　The Associated Press said on the 28th that a few hours after the White House announced the sanctions, Maduro attacked it on national television, saying that the actions of the United States were "immoral and illegal". And directly shouted to US President Donald Trump, "Don’t interfere in Venezuela!"

　　Sputnik news agency & radio reported that Maduro also accused the United States of "trying to steal Citgo from us" and said that he would take measures to protect government property in the next few hours, including filing a lawsuit in a US court.　　　　　　　　　　

Speaking of Tesla, everyone’s views on this brand are mixed. Some people think that Tesla is the representative and benchmark of modern new energy vehicles. Some people think that it is actually too boastful. Xiao Ao thinks that we should take an objective look and seriously talk about some shortcomings of this car.

1. The suspension is hard.

First of all, Tesla’s interior workmanship is relatively rough. Although Tesla pursues minimalism and cancels physical buttons in configuration to expand the user’s ride space, the overall interior gives people the impression that it is very simple and simple, and the suspension is hard. As a family scooter, rigid suspension leads to poor driving comfort. After passing a pit, the whole car was shaking. When the road is bad, I have been "crazy" for a day, and my back hurts.

2. Multiple abnormal noises

Due to process problems, Tesla is prone to abnormal noise, and there are many feedback from car owners on the Internet. Of course, this is a probability problem, which is also related to the subsequent increase in soft clothes in the car. Some netizens reported that the A-pillar occasionally makes abnormal noises. After installing the mobile phone holder, the whole panel will squeak together.

3. Poor seat comfort

Tesla’s seat is polarized in online comments. Some people think they are well supported, while others feel uncomfortable. But it is undeniable that Tesla’s position is difficult. Besides, the suspension itself is very hard, very hard. After a long journey, my whole body is very sour. The rear seats are not only hard, but also narrow, which may make the elderly feel uncomfortable.

You need to worry about choosing tires.

Although it looks cool to change the hub, it is easy to scratch because of the protruding surface of the hub. The original tire is thick, and the optional tire is thin and very fragile. After passing through some convex shock absorption bands, the tire burst directly. Here, I suggest you choose the original wheel hub instead of wasting money.

5, mobile phones and car phones often lose contact.

Tesla’s car key is a mobile phone. Although there is a card physical key, the owner basically takes the mobile phone out of the door for convenience. When the mobile phone is close to the vehicle, the vehicle will automatically unlock, and you can directly slide the door to get on the bus. Does that sound convenient?

But the actual operation is: when you pull the door beautifully, why can’t you open it? You can only take out the mobile app to unlock it. When you are unlucky, the unlock button of the mobile app can’t save you. It always means that you can’t recognize the Bluetooth key of your mobile phone. When you are in a hurry, you really delay things.

How’s it going? What do you think of Tesla in front of the screen? If you want to really experience it, you can also go to the concave-convex car rental APP. There are many models on it, and friends who want to buy a car can also rent it first. In addition, if you have any other opinions about Tesla, you are welcome to leave a message in the comment area and discuss it with you ~

　　Science and Technology Daily, Beijing, July 2 (Reporter Zhang Mengran) According to a study published in the British journal Nature Communication on the 2nd, the American research team reported a new breakthrough in combination therapy: after using a drug delivery system to continuously release antiviral drugs and treating based on the gene editing technology known as "gene magic scissors", the virus was not detected in a subgroup of mice infected with HIV.

　　A total of 13 mice were treated in two separate trials, and 5 of them showed no signs of HIV infection for up to 5 weeks after treatment. In contrast, it is easy to detect HIV in mice that have received one of these treatments alone.

　　HIV is a virus that causes defects in human immune system. HIV directly invades the human immune system, destroying cellular immunity and humoral immunity, which not only makes it difficult for the human immune system to resist invasion, but also brings difficulties to the development of specific therapeutic drugs and preventive vaccines. At present, patients infected with HIV mainly rely on various antiviral drugs for treatment. However, this therapy can’t cure the patient, and it requires lifelong medication.

　　In view of this, the Lewis Katz School of Medicine of Temple University and the University of Nebraska Medical Center team developed a combination therapy to target HIV in a group of infected mice. The therapy relies on an antiviral drug formula and CRISPR-Cas9 technology. The former will slowly release the drug and inhibit the virus activity for many days, while the latter will eliminate the virus genetic code in infected cells by cutting off the relevant DNA fragments.

　　After continuous treatment, nearly one-third of the mice did not reach the detectable level of HIV. The research team used a large number of different techniques to study mice and found that HIV was not detected in infected cells and tissue sites of these mice within 5 weeks after receiving treatment.

　　At present, the results of mouse experiments are considered promising, and researchers plan to carry out further research immediately to improve drug delivery against viruses and specifically eliminate latent viral infections.

　　Chief editor circle

　　Curing AIDS was a difficult problem without rules 10 years ago. Now, with the simplification of genetic engineering technology, many promising ideas have emerged. For example, defects caused by microorganisms are corrected with tools given by another microorganism. Although CRISPR has been popular for many years, the corresponding gene editing therapy that can be used in clinic is still in its infancy. The progress made in the field of AIDS has made people more confident in this simple technology with great potential.

On June 28th, C16, a 6-seat SUV, was officially launched. As the flagship model of LEAP 3.0 technology architecture, C16 pioneered a new category of MPSUV with the style of SUV and the function of MPV. Create a new benchmark for the industry’s six-seat SUV with leapfrog intelligent luxury configuration and worry-free energy supplement scheme, and the listing guide price is 155,800-185,800 yuan.

Among them, the guide price of C16 pure electric vehicle 520 smart edition is 161,800 yuan, the guide price of 520 exclusive edition is 168,800 yuan, and the guide price of 520 smart driving edition is 185,800 yuan; The guide price of C16 extended-range model 200 smart edition is 155,800 yuan, the 200 exclusive edition is 162,800 yuan, and the 200 smart driving edition is 179,800 yuan; Pay a deposit of 5,000 yuan within the validity period of the listing policy, and enjoy the lifetime warranty of the whole vehicle, the three power companies and the listing courtesy with a value of up to 20,000 yuan.

The body size of C16 for zero running is 4915*1905*1770mm, reaching the level of medium and large SUV; Provide six kinds of exterior color matching: Star Jade Purple, Glass Jade, Sky Grey, Star Silver, Metallic Black and Pearl White; Three interior colors: Xingyuan Purple, Malted Rice and Chixia Orange; In the five dimensions of comfort, energy supplement, intelligence, safety and configuration, a new standard for car selection of large six-seat SUV is comprehensively established.

As the flagship model of LEAP 3.0, C16 represents the latest car-making technology and concept. As Zhu Jiangming, the founder, chairman and CEO of Zero Run Automobile, said: "Zero Run always insists on self-research and self-manufacture of core components, technological innovation and adoption of the most competitive solutions. At the same time, Zero Run always insists on pricing at cost, providing users with products with higher configuration, better quality, good but not expensive. " C16 selects the top BBA suppliers, and truly "not only lowers the price, but also provides better materials and experience".

Large space+luxury seats to create a super comfortable experience

In terms of comfort experience, the zero-run C16 adopts MPSUV smart space design: the effective space length in the car is 3301mm, the overall space utilization rate is as high as 67.2%, and the interior volume of the car is 5290L.

When 6 seats are full, the trunk can still easily put down two 24-inch suitcases; After the three rows are laid down independently, the expansion volume is as high as 1022L; Three rows of seats can be folded independently, providing a 4/5/6-seat mode, which is suitable for full-scene travel.

The zero-run C16 seat is designed with a 7-layer structure, which realizes the riding quality of luxury cars. The seat fabric is made of baby-grade silicone material. The front seat comes standard with memory and main driver welcome function; Two rows of comfortable independent seats, supporting heating/ventilation function, with a maximum lying posture of 145. The rear side of the co-pilot is equipped with an intimate small table board. Through the voice command "Open the small table board", the co-pilot and the rear seat will automatically adjust the position and angle to ensure that the level and front-back distance of the table board are suitable for dining, office, homework and other scenes.

The zero-run C16 three-row seat has a sitting height of 350mm, a sitting depth of 460mm and a sitting width of 1036mm, and the seat back can be freely adjusted by 10 degrees, bidding farewell to the "small bench" riding experience in the third row. 2+2+2 gold layout, the seats are comfortable and everyone enjoys it.

Pure electric standard global 800V fast charge bid farewell to endurance anxiety.

The zero-run C16 pure electric vehicle adopts a global 800V high-voltage silicon carbide fast charging platform, with the maximum charging power of 180kW, and the fastest charging time from 30% to 80% is 15 minutes, which is twice as fast as the medium-voltage platform.

The three-in-one electric drive carried by pure electric vehicles has a power of 215kW, a torque of 360N·m, an acceleration of only 6.37s per 100 km, and a comprehensive driving efficiency of 92%. The motor adopts 360-degree intelligent oil cooling, which is more stable after long-term use and has no attenuation over 600,000 kilometers. The power consumption per 100 kilometers is 14.8kWh. As a medium-sized and large-sized 6-seat SUV, the energy consumption is lower than that of a medium-sized 5-seat SUV. With the intelligent software of the whole vehicle, the power system can deeply learn the driving habits of users and continuously evolve the software strategy, and the more it is opened, the easier it is to use;

The extended-range version has a pure battery life of 200km(CLTC) and a comprehensive battery life of 1095km(CLTC). Equipped with a new generation of high-efficiency range extender, it uses electricity for commuting in cities and oil for long-distance travel. CLTC’s low-charge fuel consumption per 100 kilometers is only 5.4L.

8295 chip+lidar intelligent cabin intelligent driving without discount

In terms of intelligent experience, the zero-run C16 intelligent cockpit adopts the industry-leading Qualcomm Snapdragon SA8295P chip, and the AI computing power NPU reaches 30TOPS, ensuring sufficient voice, semantics, image processing and self-learning and growth capabilities.

Based on the hardware configuration and software capability, the C16 voice assistant recognition of zero run is more accurate: through the four-tone area positioning, the corresponding position can be awakened, and the main driver/co-driver/full vehicle mode can be set, only the instructions of the corresponding position can be monitored, and the instructions of other positions can be shielded, and the invalid interference sound can also be isolated when many people talk; Not only can voice assistants be used in front and rear rows at any time, but passengers in three rows can also control the car and seats through voice.

The UI interface of Leapmotor OS 4.0 car machine system is fully optimized to realize immersive interaction, intelligent desktop and simplified operation experience. Elegant dynamic effect brings vivid and pleasant interactive experience and reduces the cost of users’ adaptation and learning.

Zero-run C16 provides users with intelligent driving assistance that they are willing to use, want to use, use easily and can use safely. 30 pieces of high-performance sensing hardware, including laser radar+NVIDIA Orin-X chip and 8-megapixel HD camera, provide vehicles with accurate three-dimensional sensing, self-developed algorithms and control strategies. The vehicle’s computing power is 284TOPS, which can realize the use of NAC navigation to assist cruising and liberate feet in urban areas. On expressways and urban expressways, intelligent navigation NAP is used to cover the whole scene.

Strictly observe the safety bottom line from the body to the inside of the car.

C16, a zero-run, adopts a ring-shaped cage-type integrated body: four ring-shaped path structures, a floor with 9 horizontal and 3 longitudinal beams, an integrated framework structure design of CTC2.0 battery chassis and a full-frame subframe, reaching the leading torsional stiffness of 38,396 N m/. 75% high-strength steel-aluminum hybrid body, A, B pillars, roof side beams, door panel stiffeners and other key stress parts are made of nuclear submarine-grade thermoformed steel with the highest strength of 2000Mpa, accounting for 16%, which is more solid than BBA.

The rear floor adopts 1500Mpa thermoformed steel ring-shaped integral strengthening beam, which makes the rear floor more solid and not afraid of rear-end collision. The backrest of the three rows of seats is reinforced with steel plate, which is in accordance with the luxury car standard to prevent the three rows from being invaded and injured.

C16 comes standard with 6 airbags. The transverse side air curtain is adopted. The volume of a single air curtain is as high as 46.5L, the inflation length is 23337mm, and the coverage area is 9,200 square centimeters, which fully guarantees the head safety of the first to third rows of passengers. The front main driver airbag is 60L, and the co-driver airbag is 105L, which is 20% ahead of the same class.

The braking distance of C16 at 100-0km/h in zero run reaches 35.4m, thanks to the dual insurance braking redundancy design of EHB+ESC, the tires are narrow at the front and wide at the rear, which has excellent grip and ensures the braking effect at critical moments.　

For battery safety, Zero Run C16 adopts electric drive AI cloud diagnosis +AI BMS big data intelligent battery management system+integrated thermal management system battery pack to realize 24-hour real-time monitoring at the battery level, and the early warning rate of thermal runaway is 100%. Through technologies such as "thermal runaway warning, heat source blocking, directional pressure relief and intelligent cooling", the internal thermal diffusion of the battery pack is effectively suppressed, and in extreme cases, it will not catch fire or explode for 720 minutes, ensuring battery safety.

In addition, the zero-run C16 provides a healthier interior environment for family members, and the seat is certified by OEKO-TEX?STANDARD 100. The material is the same as that of the baby pacifier, which is chewable, non-toxic, skin-friendly, stain-resistant and wear-resistant.

High-definition rear screen+Dolby panoramic sound luxury audio configuration advanced

The Zero Run C16 is equipped with a unique 15.6-inch high-definition rear ceiling screen at the same level, with 1080P high-definition resolution. It supports various operation modes such as voice, mobile phone remote control, touch control, etc., and can realize various entertainment activities such as watching videos and karaoke. It also supports dual-screen linkage and dual-screen simultaneous broadcasting functions, making your trip more exciting. Dolby Zone, created in conjunction with iQiyi, provides C16 users with 500+ Dolby version of film resources, bringing a cinematic audio-visual experience.

The zero-run C16 supports Dolby panoramic sound, and the whole car is equipped with 21 speakers, creating a 7.1.4 luxury sound layout, which is similar to the 300,000-class models such as Ideal, Weilai and Extreme Krypton, and the sound power reaches 2160W W.

Zero-run self-developed sound effects, intelligently tuned by AI algorithm, support four sound effects modes: zero-sound enjoyment, zero-sound surround, zero-sound theater and zero-sound dynamic, and provide sound effect master customization function, so users can adjust their favorite sound effects according to their preferences. With high-quality and high-price leapfrog configuration, it will bring a richer entertainment experience to mobile travel life.

Therefore, in the price range of less than 200,000 yuan, the retail C16 provides users with outstanding configuration and product experience. Since the product definition stage, it has anchored the market segment benchmark to develop. Based on the in-depth understanding of the user’s car scene, it starts to solve the pain points of big family travel from the details.

[car home Beijing Preferential Promotion Channel] At present, preferential activities are being carried out in Beijing, with the highest discount reaching 10,000 yuan and the lowest starting price of 85,900 yuan. If you are considering buying Mazda 3 Angkeira, now is an excellent opportunity. Please be sure to click "Check the car price" in the quotation form to get a higher discount!

Mazda 3 Angkeira adopts a streamlined body design, and the front face part combines exquisite lines and dynamic elements. Its unique air intake grille design echoes the sharp headlight group, showing a strong sporty atmosphere. The overall style not only reflects Mazda’s consistent elegance and exquisiteness, but also keeps fashionable and dynamic.

Mazda 3 Angkor Serra has performed well in body size, with a length * width * height of 4,662 * 1,797 * 1,445 mm and a wheelbase of 2,726 mm respectively. The body lines are smooth and dynamic, and the front and rear wheel tracks are 1568 mm and 1581 mm respectively, ensuring a stable driving posture. Equipped with tyre size 205/60 R16, the rim style is simple without losing the sense of movement, which improves the visual effect and driving performance of the whole vehicle.

The interior style of Mazda 3 Angkeira is simple and sporty, creating a fashionable and elegant atmosphere. The steering wheel is made of plastic, which provides good grip and maneuverability, and supports manual adjustment up and down and back and forth, so that the driver can find the most comfortable position. The center console is equipped with an 8.8-inch high-definition touch screen, which supports a variety of functions, including multimedia playback, navigation and vehicle settings. In addition, the car also provides two USB ports and an SD card slot, which is convenient for passengers to connect external devices and play media files. The seat is made of fabric. The main seat has the functions of fore-and-aft adjustment, backrest adjustment and height adjustment (4 directions), while the co-pilot seat supports fore-and-aft adjustment and backrest adjustment to provide passengers with a comfortable sitting position. The rear seats can be laid down in proportion, which increases the flexibility of luggage space.

Mazda 3 Angkeira is equipped with a 1.5L naturally aspirated engine with a maximum power of 86kW and a maximum torque of 148 N m.. The perfect combination of this L4 engine and the 6-speed manual transmission provides the driver with excellent power output and smooth shifting experience.

The owner of car home thinks that the exterior design of Mazda 3 Angkeira is excellent, especially the lines on the side and the silver decorative strips on the door, which makes her fondle admiringly. She said that when choosing a vehicle, the exterior design of Mazda 3 Angkeira became the reason for her final choice. She described: "Just take the side, the exterior design of this car is enough to fight, and the transition of the waistline can be said to be a flowing mountain. The silver-gray exterior paint with the silver decorative strip on the door is really unique."

[car home Jiaxing Promotion Channel] Good news! Now is a good time to contribute to your car purchase plan, because the high-profile models are undergoing a high-profile preferential activity in Jiaxing. This popular model has launched a cash discount of up to 0.7 million yuan, making the already cost-effective Xingyue L Zhiqing more within reach. The minimum starting price has been adjusted to 152,700 yuan, which is undoubtedly a good opportunity for consumers who pursue high quality and benefits. If you want to grasp this car purchase discount, you may wish to click "Check the car price" in the quotation form, and let us jointly explore a more competitive car purchase plan.

The exterior design of the car system Xingyue L Zhiqing shows a unique modern style. The front face design lines are smooth, and the large-area air intake grille is decorated with chrome, which is exquisite without losing the sense of strength. The overall body contour is full, showing the perfect combination of luxury and dynamic, and the details show the sense of advanced and technological charm, which can attract everyone’s attention whether it is close-up or distant.

With its exquisite body proportion, Xingyue L Zhiqing shows an elegant profile. The body size is 4795mm*1895mm*1689mm, and the wheelbase reaches 2845 mm. This size design not only provides sufficient internal space, but also ensures the driving stability. The lines on the side of the car are smooth, and the exquisite lines outline strength and movement, highlighting its sense of advanced. Tyre size adopts 235/50 R19, with the same specifications of front and rear wheels and dynamic rim design, which further enhances the visual impact and shows its unique side aesthetics without losing movement.

The interior design of Xingyue L Zhiqing draws on the elements of luxury and technology, showing the style of paying equal attention to exquisiteness and comfort. The steering wheel wrapped in leather provides a good grip and support, supports manual up and down+front and rear adjustment, and ensures the best operating position of the driver. The 12.3-inch central control screen stands on the instrument panel, clearly displaying multimedia information, navigation and vehicle data, and integrating voice recognition system, which is convenient for users to control many functions of vehicles.

In terms of seats, Xingyue L Zhiqing adopts imitation leather material to ensure the touch and texture. The main driver’s seat supports front and rear adjustment, backrest adjustment, height adjustment (4-way) and lumbar support (4-way), providing multi-directional comfort. At the same time, it is also equipped with heating and ventilation functions, so that drivers can enjoy exclusive care in different seasons. The driver’s seat is also equipped with electric seat memory function, which increases convenience. The co-pilot seat also provides fore-and-aft adjustment and backrest adjustment, while the second row of seats supports backrest adjustment, making the space layout flexible. Seats are designed and configured to create a comfortable and practical riding environment.

Xingyue L Zhiqing is equipped with a 1.5T turbocharged engine with an output of 163 HP and a maximum torque of 255 N m.. Matching the 3-speed DHT transmission not only ensures the smooth transmission of power, but also brings a high-efficiency driving experience.

Summarizing the evaluation of the owner, the design of Xingyue L Zhiqing has undoubtedly won many eyes for it. Its domineering air intake grille and sharp headlights show unique charm, and the smooth lines of the body complement the sense of strength. The penetrating taillights at night are the crowning touch, which undoubtedly improves the recognition of vehicles. This design undoubtedly brought a visual feast to drivers and passers-by, and lived up to its remarkable turn-around rate on the road.