Beijing, May 18 (Reporter Zhang Ni) Recently, many places in the country have been facing high temperature and heat waves, and the highest temperature in some cities even exceeded the extreme value of the same period. With the rising temperature, high-temperature allowances in various places have also entered the distribution time. It is worth noting that in some areas, including Jiangsu and Tianjin, the high temperature allowance has been raised.

　　The high temperature allowance has entered the distribution time, and these provinces have raised it.

　　According to the Management Measures for Heatstroke Prevention and Cooling Measures revised in 2012, if the employer arranges the workers to engage in outdoor open-air operations in hot weather above 35℃ and cannot take effective measures to reduce the workplace temperature below 33℃, it shall pay the workers a high-temperature allowance.

　　Judging from the distribution time of high temperature allowance, there are also differences in different places due to differences in climatic conditions. For example, the distribution time in northern areas such as Beijing and Shanxi is from June to August, and the distribution time in Hainan Province is as long as seven months, from April to October.

　　In terms of subsidy standards, there are also great differences among provinces. The reporter from Zhongxin. com noted that some provinces have recently raised the high temperature allowance.

　　This month, Jiangsu raised the standard of high temperature allowance from 200 yuan to 300 yuan every month, and the annual payment time is four months (June, July, August and September).

　　In Tianjin, heatstroke prevention and cooling expenses and high temperature allowance are linked to the average wage level of employees in the city last year.

　　According to the notice issued by Tianjin Human Resources and Social Security Bureau, in 2018, the standard of heatstroke prevention and cooling expenses for employees in this city was 168 yuan per month, up by 10 yuan from the previous year, and the standard of high temperature allowance was 31 yuan daily, up by 2 yuan from the previous year.

　　Hebei adjusted the high temperature allowance standard last year. According to the regulations, workers engaged in outdoor open-air operations are adjusted from 1.5 yuan to 2 yuan per hour; Indoor workers who have no heatstroke prevention and cooling equipment or have heatstroke prevention and cooling equipment but can not achieve the effect of reducing the temperature in the workplace are adjusted from 1 yuan to 1.5 yuan per hour.

　　Defining safeguards in many places and deducting high temperature allowance will be severely punished.

　　In recent years, the phenomenon that the high-temperature allowance has been deducted has been concerned by the society. In order to prevent the high-temperature allowance from becoming "cool on paper", many places have also introduced specific measures to ensure its landing.

　　For example, according to the Measures for Labor Protection in Hot Weather in Shandong Province, if an employer forces workers to work during hot weather, or fails to pay heatstroke prevention and cooling fees according to the prescribed standards, the human resources and social security department at or above the county level shall order them to make corrections; If no correction is made within the time limit, a fine of 2000 yuan or more and 20000 yuan or less shall be imposed; If a crime is constituted, criminal responsibility shall be investigated according to law.

　　In addition, it is also clear in many places that summer drinks such as mung bean soup cannot offset the high temperature allowance.

　　In the recent notice jointly issued by Jiangsu Provincial Department of Human Resources and Social Security and other four departments, it is emphasized that the wages of workers during normal working hours and the minimum wage set by the state do not include the high temperature allowance, and the employer shall not reduce the wages of workers because of the high temperature allowance, and the expenses of labor protection articles such as heatstroke prevention drinks and medicines provided by the employer shall not offset the high temperature allowance.

　　In addition, if the employer fails to pay the high-temperature allowance according to the regulations, the workers can report complaints to the human and social departments, or apply for mediation, arbitration or bring a lawsuit according to law. The employer shall bear the burden of proof for the workers engaged in hot weather operations and the distribution of high temperature allowances.

　　The Shanxi Provincial Department of Human Resources and Social Security has previously stipulated that if the work is stopped and the working hours are shortened due to high temperature weather, the employer shall not deduct or reduce the wages of the workers, and the employer shall not reduce the wages of the workers due to the increase of the high temperature allowance.

　　Tips for heatstroke prevention and cooling: Pay attention to sun protection and hydration in hot weather.

　　According to the forecast of the Central Meteorological Observatory, there will still be high temperature above 35℃ in parts of southern and eastern Jiangnan and eastern South China on the 18th, and the local maximum temperature will reach 38℃. Under the heat wave, what measures should ordinary people take in their daily travel?

　　In this regard, professional doctors give the following suggestions:

　　1. Try to minimize going out, especially at noon. When going out, it is best to prepare for heatstroke prevention and cooling.

　　2. People, especially middle-aged and elderly people with cardiovascular diseases, must replenish water in time, drink more boiled water every day, and supplement light salt water when sweating heavily.

　　3, high temperature weather should not be greedy, because drinking too much cold drinks will aggravate the stimulation of the intestines and damage human health.

　　4. In case of premonition of heatstroke or mild heatstroke, you should immediately move to a cool and ventilated place to rest, and closely observe the changes of body temperature, pulse, respiration and blood pressure.

　　You can drink light salt water, cold watermelon water, mung bean soup, etc. to replenish water, and take heatstroke prevention and cooling drugs such as Rendan, Shidishui or Huoxiang Zhengqi Powder.

　　5. Severe heatstroke patients with symptoms such as dehydration, circulatory failure, spasm and high fever should be sent to the hospital in time for emergency treatment. The key point of treatment is to reduce body temperature, correct water and electrolyte disorders and acidosis in the body, and actively prevent and treat shock and pulmonary edema.

First, the development process of China’s medical beauty industry

According to Article 2 of the Measures for the Administration of Medical Beauty Services, medical beauty refers to the repair and reshaping of human appearance and the morphology of various parts of the human body by surgery, drugs, medical devices and other traumatic or invasive medical techniques. Medical beauty is divided into surgical and non-surgical medical beauty according to whether surgery is needed, which are all carried out by registered professional doctors and medical experts.

Compared with the United States, South Korea and other big countries, China’s medical beauty industry started late, and its development process can be roughly divided into three stages:

Figure 1: The development course of China’s medical beauty industry

According to public information

From 1949 to 2008, marked by the establishment of plastic surgery for the first time, the domestic medical beauty industry began to sprout. In 1949, plastic surgery was established for the first time in China, which marked the germination of medical beauty industry in China. Since then, many public hospitals have set up plastic surgery departments, such as the Plastic Surgery Hospital of China Medical College. During this period, the main demand for medical beauty comes from passive plastic surgery such as post-injury repair and correction.

2008-2014 was the initial stage of the industry, and the upstream raw material manufacturers developed well, which led to the emergence of private medical institutions. This stage has three characteristics. First, a number of related companies are listed or listed, such as the listing of Huaxi Bio in Hong Kong in 2008 and the establishment of Huahan Plastic in 2010. Second, industry integration and mergers and acquisitions are frequent, and Langzi, suning universal and Fosun all deploy the medical and beauty industry through mergers and acquisitions; Third, the cooperation between China and South Korea has been further deepened, with Langzi and Evergrande as the representatives, and Korean technology and doctors have been continuously introduced and promoted.

Since 2014, with the help of capital, the industry has prospered and developed, and the "internet plus" wave has given birth to the Internet medical beauty platform. Driven by the mobile Internet and consumption upgrading, the Internet medical beauty platform has developed and gradually become the hub of the medical beauty industry chain. Since 2014, Internet medical beauty platforms such as New Oxygen, More Beauty and Yuemei.com have been favored by the capital market and have won several rounds of financing.

Second, the general situation of medical beauty industry chain

According to the relationship between the upstream and downstream of medical beauty products from manufacturing to serving consumers, the medical beauty industry chain can be divided into upstream raw material equipment manufacturers and downstream medical beauty institutions. The upstream raw material equipment, including instruments and equipment, injections and auxiliary materials, reach downstream private or public institutions through direct sales or consignment by manufacturers to provide corresponding services for medical beauty consumers. In addition, with the development of Internet technology and the penetration of consumer groups, the Internet medical beauty platform helps upstream manufacturers simplify distribution links by linking medical beauty institutions, and on the other hand, it can help consumers make efficient decisions. Related service providers include medical beauty industry information service providers, medical beauty APP, medical beauty insurance and so on.

Figure 2: Medical Beauty Industry Chain, compiled and drawn by the author.

Third, the status quo of China’s medical beauty industry

With the improvement of economic conditions, the continuous improvement of living standards, and at the same time, China consumers are influenced by the new trend of international medical beauty, and their awareness of medical beauty consumption is gradually awakening, and the medical beauty market is showing a rapid development trend. In 2019, the medical beauty market in China reached 176.9 billion yuan, and the CAGR was 28.54% in 2015-2019, which was higher than the same period in the world.

Figure 3: Global and China Medical and Beauty Industry Market Scale in 2015-2019

Source: Lemon Aimei, iResearch, etc.

1. Upstream: the overall concentration of raw materials and equipment is relatively high, and the domestic substitution is accelerated.

Medical cosmetology can be divided into surgical category (plastic surgery) and non-surgical category (Light medical cosmetology), in which the market capacity of Light medical cosmetology, China has steadily expanded, accounting for a stable proportion of the overall medical beauty market. Surgical medical beauty projects include eyelid plastic surgery, nose plastic surgery, oral orthodontics, hair transplantation and other head and face projects, breast enhancement and other chest projects, as well as liposuction and other physical projects. Non-surgical medical beauty projects include injection projects such as botulinum toxin and hyaluronic acid, facial rejuvenation projects such as photon rejuvenation, and other projects such as tooth beauty. China’s Light medical cosmetology market accounts for a much higher proportion of the overall medical beauty market than the surgical cosmetic plastic surgery market, and has been stable at around 65%-70% in recent years. In 2018, the market size of China Light medical cosmetology was 102.8 billion yuan, a year-on-year increase of 30.62%; In 2019, the market size of China Light medical cosmetology was 119.1 billion yuan, a year-on-year increase of 15.86%.

Table 1: Classification of Medical Beauty Projects

According to public information

Figure 4: The market scale of China Light medical cosmetology accounts for a high proportion of the overall medical beauty project scale.

Source: iResearch.

Figure 5: China Light medical cosmetology market size

Source: iResearch.

In terms of raw materials in Light medical cosmetology, hyaluronic acid and botulinum toxin are the main injection fillers. According to ISAPS data, the plastic surgery projects using botulinum toxin and hyaluronic acid reached 5.03 million and 3.3 million respectively, accounting for a total of 66%. According to the new oxygen big data, hyaluronic acid and botulinum toxin accounted for 66.59% and 32.67% respectively, accounting for a total of 99.26%.

Figure 6: Distribution of Injection Medicine Beauty in China

Source: New Oxygen Big Data

Upstream products have high technical barriers and strict listing approval, resulting in a high concentration of upstream manufacturers. In China, it takes 3-5 years to get the certificate of hyaluronic acid class III medical devices, and it takes 5-8 years to get the registration certificate of botulinum toxin drugs. Therefore, the upstream medical machinery link in the United States has a high moat advantage with strict policies and technical barriers. Up to now, a total of 16 enterprises in China’s mainland market have the registration certificate of hyaluronic acid class III medical devices issued by NMPA, while only 4 enterprises have the registration certificate of botulinum toxin biological drugs, of which only one is domestic.

Table 2: List of Domestic Approved Hyaluronic Acid and Botulinum Toxin Products

Source: NMPA, flint creation

Hyaluronic acid (commonly known as hyaluronic acid) is a kind of natural macromolecular mucopolysaccharide with N- acetylglucosamine and D- glucuronic acid as structural units, which widely exists in vertebrate connective tissues and body fluids, and has unique viscoelasticity and excellent water retention properties. At present, medical grade hyaluronic acid terminal products mainly cover three application fields: medical beauty, orthopedic treatment and ophthalmic treatment. In 2018, the medical beauty market was larger than other application fields, reaching 3.70 billion yuan, and the growth rate was higher than other fields, with a compound growth rate of 32.3% from 2014 to 2018. In 2020, it is estimated that the market scale of medical beauty hyaluronic acid terminal products in China will reach 4.82 billion yuan.

Figure 7: Market size of medical-grade hyaluronic acid end products in China (100 million yuan)

Source: Frost & Suliivan

China’s hyaluronic acid market is dominated by imports, and there is a large room for domestic substitution. At present, there are more than 20 kinds of hyaluronic acid products subdivided by National Medical Products Administration (NMPA). In terms of sales, the top four companies in the hyaluronic acid market are all foreign-funded enterprises, accounting for 68% of the total in 2019, and imported products dominate. In terms of sales volume, the sales volume of domestic hyaluronic acid has exceeded 40% in 2018, and domestic brands have gradually emerged. With the continuous improvement of cross-linking method and production technology of domestic hyaluronic acid products, the gap between domestic products and imported products in terms of concentration, degree of cross-linking, particle size, hardness and cohesiveness is gradually narrowing, and the domestic substitution process of hyaluronic acid will be deepened.

Figure 8: China Medical Beauty HA Product Sales Ranking in 2019

Source: Frost & Suliivan

Figure 9: Sales ranking of HA products of China Medical Beauty in 2018

Source: Frost & Suliivan

Botulinum toxin (commonly known as botulinum toxin): It is a toxic protein secreted by botulinum in the process of reproduction and has strong neurotoxicity. Botulinum toxin, as a nerve agent, can inhibit the release of acetylcholine from nerve endings by irreversibly cutting the neurotransmitter conduction complex, thus causing muscle relaxation and paralysis. However, its biggest application scenario is not in the medical field, but for medical beauty needs such as dynamic wrinkle correction, face-lifting and stovepipe. The overall market scale of botulinum toxin in China is in the stage of rapid growth. According to Limu Information Consulting, the market scale of botulinum toxin sold through formal channels in China has accelerated since 2015, reaching 3.92 billion yuan in 2018, a year-on-year increase of 32%.

Because the product is highly toxic, it is strictly regulated by the state. At present, there are only four official certifications in China (Hengli made in China, BOTOX imported from the United States, Dysport made by Ipsen in Britain and Letty Bo developed by Hugel in Korea). There are still seven botulinum toxin products in the process of applying for qualification. Looking around the world, the United States is the dominant company, Korean botulinum toxin producers all have the layout in China, and other manufacturers are researching botulinum toxin products, and Britain, Germany, Russia and India all have product layouts.

Laser beauty equipment: There are many kinds of equipment in the medical beauty equipment market, among which laser beauty equipment achieves the effect of plastic surgery through "light intervention" and becomes the backbone of the beauty medical market. Laser beauty instrument can be used in the fields of skin softening, nevus removal, wrinkle removal, hair removal and so on. According to public information, China’s laser beauty instrument market has developed rapidly. In 2019, the market scale was 2.84 billion yuan, a year-on-year increase of 19.73%.

Laser beauty instrument depends on imports, and domestic products are gradually recognized in the market. Although there are many laser medical beauty equipment enterprises in China, the mainstream equipment is mostly imported products. In the photoelectric equipment industry, foreign giants and local dominant enterprises are relatively mature, and the industry concentration is high. At present, the common suppliers of imported laser medical equipment include Alma in Israel, Lumenis in the United States, and Cynosure in the United States, accounting for 80% of the regular equipment and occupying a dominant position. The domestic medical and beauty equipment industry started late, and the technical foundation of enterprises is relatively weak. Domestic laser medical beauty enterprises have continuously enhanced their R&D capabilities, improved product quality, and gradually increased their market share through extension investment, mergers and acquisitions, and independent research and development. In terms of specific products, Wuhan Qizhi Laser’s photon therapeutic instrument and semiconductor laser depilation instrument, Shenzhen Peninsula Medical acne therapeutic instrument, Shenzhen GSD’s multi-element rf beauty instrument and other products are gradually recognized in the market.

2. Downstream: the entry barrier of cosmetic and plastic surgery hospital industry is low, and the distribution is unbalanced; The trend of "internet plus" is expected to reconstruct the ecology of medical beauty industry.

At present, in the market of medical beauty hospitals in China, service terminals are mainly divided into public plastic surgery hospitals and private beauty hospitals. Generally speaking, private specialized beauty hospitals and their clinics occupy most of the market space. However, due to the concentration of top experts, scholars and surgeons in the industry, the most advanced medical beauty resources and technologies in China, standardized management and high trust, public hospitals are still a very important part of the domestic medical beauty industry. In the future, with the advancement of medical reform, public hospitals are expected to regain their vitality in the market competition of medical beauty and jointly promote the rapid development of China’s beauty industry with private capital.

At present, medical and aesthetic institutions and professionals are mainly concentrated in the developed areas in the east. Although the market coverage has been extended to the central cities in the central and western regions, the market space of the second, third and third tier cities in the central and western regions with greater market breadth is still blank, and there is still a lack of channels for product promotion and business expansion, and it will take time to expand downward. On the whole, China’s medical beauty market has formed a layout with Beijing, Shanghai, Nanjing, Guangzhou, Hangzhou, Shenzhen, Wuhan, Changsha, Chongqing and Chengdu as the center of gravity, which can be roughly divided into four sectors: East China, North China, South China, Central China and West China, among which North China, East China and South China account for the vast majority.

Figure 10: Regional Distribution of China’s Medical Beauty Market

According to public information

Open up the relationship between medical and aesthetic institutions and consumers, and the Internet platform is expected to lead the reform of medical and aesthetic institutions. The main problem faced by private beauty hospitals is the high cost of sales and customer acquisition, and consumers are also faced with the embarrassment of asymmetric supply and demand information of medical beauty. The medical beauty APP platform mainly gathers users through the form of content+community+e-commerce or appointment referral, and builds a bridge for communication between B-end institutions, doctors and C-end customers, which improves the decision-making efficiency of users and reduces the marketing cost of institutions. From 2011 to now, dozens of medical beauty apps such as New Oxygen, Yuemei and Meituan Medical Beauty have emerged. Medical beauty App has purified the industry to a certain extent, promoted the medical beauty industry to transparency and standardization, and to some extent disintegrated the phenomenon of using the information of buyers and sellers to collect fees unequally. However, from the current point of view, the relevant medical beauty apps have not found a sustainable and stable profit model, and they still focus on business exploration in the short term.

Fourth, the future development prospects

At present, China’s medical beauty market is in the process of rapid development, and it faces the following outstanding problems: (1) The market is chaotic: raw materials and drugs of medical beauty are chaotic, and there are over-packaging of items and over-consumption of drugs; (2) The industry concentration is very low: the market share of head enterprises can only reach about 5%, and most of the markets are concentrated in some enterprises in the middle and long tail; (3) Medical resources can’t meet the demand: experts such as doctors and nurses, as well as hospital management talents are in short supply. With the rapid expansion of the medical beauty market, the medical resources in the industry will become more and more tense; (4) The supervision of the industry is still lacking: many medical and aesthetic supervision systems and policies are still in the process of exploration and improvement.

Since 2002, China’s supervision of medical beauty industry has become increasingly strict. The state has successively promulgated the management methods, institutional standards and classified management catalogue of medical beauty services, and promulgated the evaluation standards and detailed rules of medical beauty institutions. In 2016, China Plastic Surgery Association was established, and medical beauty service institutions officially entered the era of compliance. In 2020, eight ministries and commissions, including the Health and Health Commission, jointly issued the Notice on Further Strengthening the Comprehensive Supervision and Law Enforcement of Medical Beauty to crack down on illegal medical cosmetology and further rectify the medical beauty industry. With the increase of non-surgical items in the beauty market and the popularity of injection filling items, consumers’ complaints about after-sales service, quality and contract of medical beauty institutions have increased. Relevant departments should supervise medical beauty services and drugs in a targeted manner according to the development trend of the industry market, further promote the structural reform of the medical beauty industry, and improve the bad phenomenon of regaining customer marketing and neglecting professional medical care in the industry.

Table 3: Supervision Policy of Medical Beauty Industry in China

According to public information

tag

In the wave of "Yan value economy", everyone has a love of beauty, and the increase of per capita disposable income is an important factor to quickly enlarge the "love of beauty". In the medical and beauty industry chain, the domestic substitution of upstream raw materials and equipment has accelerated, while the downstream industries are more chaotic. However, the trend of "internet plus" is expected to reconstruct the ecology of medical beauty industry. At the same time, the state has issued a series of policies to continuously guide the industry to develop in a standardized and healthy way, and drive the industry to develop healthily.

* Disclaimer: This article is an original article for Flint, written by Xin Mingyu, and may not be reproduced without authorization.

On June 28th, C16, a 6-seat SUV, was officially launched. As the flagship model of LEAP 3.0 technology architecture, C16 pioneered a new category of MPSUV with the style of SUV and the function of MPV. Create a new benchmark for the industry’s six-seat SUV with leapfrog intelligent luxury configuration and worry-free energy supplement scheme, and the listing guide price is 155,800-185,800 yuan.

Among them, the guide price of C16 pure electric vehicle 520 smart edition is 161,800 yuan, the guide price of 520 exclusive edition is 168,800 yuan, and the guide price of 520 smart driving edition is 185,800 yuan; The guide price of C16 extended-range model 200 smart edition is 155,800 yuan, the 200 exclusive edition is 162,800 yuan, and the 200 smart driving edition is 179,800 yuan; Pay a deposit of 5,000 yuan within the validity period of the listing policy, and enjoy the lifetime warranty of the whole vehicle, the three power companies and the listing courtesy with a value of up to 20,000 yuan.

The body size of C16 for zero running is 4915*1905*1770mm, reaching the level of medium and large SUV; Provide six kinds of exterior color matching: Star Jade Purple, Glass Jade, Sky Grey, Star Silver, Metallic Black and Pearl White; Three interior colors: Xingyuan Purple, Malted Rice and Chixia Orange; In the five dimensions of comfort, energy supplement, intelligence, safety and configuration, a new standard for car selection of large six-seat SUV is comprehensively established.

As the flagship model of LEAP 3.0, C16 represents the latest car-making technology and concept. As Zhu Jiangming, the founder, chairman and CEO of Zero Run Automobile, said: "Zero Run always insists on self-research and self-manufacture of core components, technological innovation and adoption of the most competitive solutions. At the same time, Zero Run always insists on pricing at cost, providing users with products with higher configuration, better quality, good but not expensive. " C16 selects the top BBA suppliers, and truly "not only lowers the price, but also provides better materials and experience".

Large space+luxury seats to create a super comfortable experience

In terms of comfort experience, the zero-run C16 adopts MPSUV smart space design: the effective space length in the car is 3301mm, the overall space utilization rate is as high as 67.2%, and the interior volume of the car is 5290L.

When 6 seats are full, the trunk can still easily put down two 24-inch suitcases; After the three rows are laid down independently, the expansion volume is as high as 1022L; Three rows of seats can be folded independently, providing a 4/5/6-seat mode, which is suitable for full-scene travel.

The zero-run C16 seat is designed with a 7-layer structure, which realizes the riding quality of luxury cars. The seat fabric is made of baby-grade silicone material. The front seat comes standard with memory and main driver welcome function; Two rows of comfortable independent seats, supporting heating/ventilation function, with a maximum lying posture of 145. The rear side of the co-pilot is equipped with an intimate small table board. Through the voice command "Open the small table board", the co-pilot and the rear seat will automatically adjust the position and angle to ensure that the level and front-back distance of the table board are suitable for dining, office, homework and other scenes.

The zero-run C16 three-row seat has a sitting height of 350mm, a sitting depth of 460mm and a sitting width of 1036mm, and the seat back can be freely adjusted by 10 degrees, bidding farewell to the "small bench" riding experience in the third row. 2+2+2 gold layout, the seats are comfortable and everyone enjoys it.

Pure electric standard global 800V fast charge bid farewell to endurance anxiety.

The zero-run C16 pure electric vehicle adopts a global 800V high-voltage silicon carbide fast charging platform, with the maximum charging power of 180kW, and the fastest charging time from 30% to 80% is 15 minutes, which is twice as fast as the medium-voltage platform.

The three-in-one electric drive carried by pure electric vehicles has a power of 215kW, a torque of 360N·m, an acceleration of only 6.37s per 100 km, and a comprehensive driving efficiency of 92%. The motor adopts 360-degree intelligent oil cooling, which is more stable after long-term use and has no attenuation over 600,000 kilometers. The power consumption per 100 kilometers is 14.8kWh. As a medium-sized and large-sized 6-seat SUV, the energy consumption is lower than that of a medium-sized 5-seat SUV. With the intelligent software of the whole vehicle, the power system can deeply learn the driving habits of users and continuously evolve the software strategy, and the more it is opened, the easier it is to use;

The extended-range version has a pure battery life of 200km(CLTC) and a comprehensive battery life of 1095km(CLTC). Equipped with a new generation of high-efficiency range extender, it uses electricity for commuting in cities and oil for long-distance travel. CLTC’s low-charge fuel consumption per 100 kilometers is only 5.4L.

8295 chip+lidar intelligent cabin intelligent driving without discount

In terms of intelligent experience, the zero-run C16 intelligent cockpit adopts the industry-leading Qualcomm Snapdragon SA8295P chip, and the AI computing power NPU reaches 30TOPS, ensuring sufficient voice, semantics, image processing and self-learning and growth capabilities.

Based on the hardware configuration and software capability, the C16 voice assistant recognition of zero run is more accurate: through the four-tone area positioning, the corresponding position can be awakened, and the main driver/co-driver/full vehicle mode can be set, only the instructions of the corresponding position can be monitored, and the instructions of other positions can be shielded, and the invalid interference sound can also be isolated when many people talk; Not only can voice assistants be used in front and rear rows at any time, but passengers in three rows can also control the car and seats through voice.

The UI interface of Leapmotor OS 4.0 car machine system is fully optimized to realize immersive interaction, intelligent desktop and simplified operation experience. Elegant dynamic effect brings vivid and pleasant interactive experience and reduces the cost of users’ adaptation and learning.

Zero-run C16 provides users with intelligent driving assistance that they are willing to use, want to use, use easily and can use safely. 30 pieces of high-performance sensing hardware, including laser radar+NVIDIA Orin-X chip and 8-megapixel HD camera, provide vehicles with accurate three-dimensional sensing, self-developed algorithms and control strategies. The vehicle’s computing power is 284TOPS, which can realize the use of NAC navigation to assist cruising and liberate feet in urban areas. On expressways and urban expressways, intelligent navigation NAP is used to cover the whole scene.

Strictly observe the safety bottom line from the body to the inside of the car.

C16, a zero-run, adopts a ring-shaped cage-type integrated body: four ring-shaped path structures, a floor with 9 horizontal and 3 longitudinal beams, an integrated framework structure design of CTC2.0 battery chassis and a full-frame subframe, reaching the leading torsional stiffness of 38,396 N m/. 75% high-strength steel-aluminum hybrid body, A, B pillars, roof side beams, door panel stiffeners and other key stress parts are made of nuclear submarine-grade thermoformed steel with the highest strength of 2000Mpa, accounting for 16%, which is more solid than BBA.

The rear floor adopts 1500Mpa thermoformed steel ring-shaped integral strengthening beam, which makes the rear floor more solid and not afraid of rear-end collision. The backrest of the three rows of seats is reinforced with steel plate, which is in accordance with the luxury car standard to prevent the three rows from being invaded and injured.

C16 comes standard with 6 airbags. The transverse side air curtain is adopted. The volume of a single air curtain is as high as 46.5L, the inflation length is 23337mm, and the coverage area is 9,200 square centimeters, which fully guarantees the head safety of the first to third rows of passengers. The front main driver airbag is 60L, and the co-driver airbag is 105L, which is 20% ahead of the same class.

The braking distance of C16 at 100-0km/h in zero run reaches 35.4m, thanks to the dual insurance braking redundancy design of EHB+ESC, the tires are narrow at the front and wide at the rear, which has excellent grip and ensures the braking effect at critical moments.　

For battery safety, Zero Run C16 adopts electric drive AI cloud diagnosis +AI BMS big data intelligent battery management system+integrated thermal management system battery pack to realize 24-hour real-time monitoring at the battery level, and the early warning rate of thermal runaway is 100%. Through technologies such as "thermal runaway warning, heat source blocking, directional pressure relief and intelligent cooling", the internal thermal diffusion of the battery pack is effectively suppressed, and in extreme cases, it will not catch fire or explode for 720 minutes, ensuring battery safety.

In addition, the zero-run C16 provides a healthier interior environment for family members, and the seat is certified by OEKO-TEX?STANDARD 100. The material is the same as that of the baby pacifier, which is chewable, non-toxic, skin-friendly, stain-resistant and wear-resistant.

High-definition rear screen+Dolby panoramic sound luxury audio configuration advanced

The Zero Run C16 is equipped with a unique 15.6-inch high-definition rear ceiling screen at the same level, with 1080P high-definition resolution. It supports various operation modes such as voice, mobile phone remote control, touch control, etc., and can realize various entertainment activities such as watching videos and karaoke. It also supports dual-screen linkage and dual-screen simultaneous broadcasting functions, making your trip more exciting. Dolby Zone, created in conjunction with iQiyi, provides C16 users with 500+ Dolby version of film resources, bringing a cinematic audio-visual experience.

The zero-run C16 supports Dolby panoramic sound, and the whole car is equipped with 21 speakers, creating a 7.1.4 luxury sound layout, which is similar to the 300,000-class models such as Ideal, Weilai and Extreme Krypton, and the sound power reaches 2160W W.

Zero-run self-developed sound effects, intelligently tuned by AI algorithm, support four sound effects modes: zero-sound enjoyment, zero-sound surround, zero-sound theater and zero-sound dynamic, and provide sound effect master customization function, so users can adjust their favorite sound effects according to their preferences. With high-quality and high-price leapfrog configuration, it will bring a richer entertainment experience to mobile travel life.

Therefore, in the price range of less than 200,000 yuan, the retail C16 provides users with outstanding configuration and product experience. Since the product definition stage, it has anchored the market segment benchmark to develop. Based on the in-depth understanding of the user’s car scene, it starts to solve the pain points of big family travel from the details.

　　World internet conference is held once a year, and the Internet, digital economy and artificial intelligence have already penetrated into every corner of our daily life. What will happen to the Internet in the next 30 years? What new business opportunities will the debut of 5G bring? What problems has the digital economy solved for us? This year, several Internet café s have made in-depth thinking on these issues, and at the same time, they have also brought us inspiration.

　　Ma Yun: In the next 30 years, the Internet will be "from scratch".

　　If the Internet was "from scratch" in the past 20 years, it will be "from scratch" in the next 30 years. This "nothing" is "nothing" everywhere, and no one can exist without the network.

　　In Ma Yun’s view, there may be many people who hate artificial intelligence now, but in the future, if there is no artificial intelligence, the whole society will not be able to operate. "Four years ago, my mother complained that she couldn’t use a mobile phone, and now they can use it. In China, many 70-year-olds can easily use technologies unimaginable five years ago. " Ma Yun said.

　　"I am a firm optimist of the digital economy. From the beginning, I firmly believed in the power of the digital economy and platform. This is a good opportunity for the world to achieve inclusive growth. The world needs leadership in digital technology. The speed of world change is definitely getting faster and faster, which will bring many social problems and uncertainties, but no one is an expert of tomorrow, and the government, academia and enterprises need to work together to solve problems. " For the digital economy, Ma Yun made this thinking. "In addition, we also need to formulate smart policies at the moment of wisdom, and don’t use yesterday’s practices to solve tomorrow’s problems."

　　Ma Huateng: Science and technology are good, not just simple Internet public welfare.

　　For the next wave of technology, Ma Huateng has a judgment: in the next two or three years, large-scale commercialization of 5G will be gradually rolled out, and 1 million devices can be connected to the network at the same time per square kilometer. This large bandwidth, low delay and high reliability network will send all kinds of applications driven by artificial intelligence to thousands of households. The threshold for transformation and upgrading of all walks of life will be continuously lowered, and the development of industrial Internet will enter the "fast lane".

　　Looking forward to cutting-edge technology, Ma Huateng emphasized that "technology is good": "We hope to think and explore with the industry, build correct values, social responsibilities and behavioral norms in the digital age, and build a healthy, inclusive, reliable and sustainable smart society."

　　Lei Jun: 5G+AIoT will become the next generation super Internet.

　　In the past, the massive applications provided by the Internet brought a lot of convenience to our lives, and the future Internet will become a part of intelligent life itself. Lei Jun believes that many AI products, from smart assistants and smart speakers in mobile phones to all kinds of robots, have been integrated into our daily lives. With the AI+ voice interaction becoming more and more daily, using voice to control the lighting switch, even turning on the air conditioner and watching TV is just a matter of words, which is particularly natural, even for the elderly and children.

　　"It is foreseeable that in the future, people’s lives will have an ubiquitous Internet figure, and all personal and home devices can be interconnected to truly provide 24-hour companionship services in our lives. Among them, many new intelligent life scenes and more new business opportunities will be added with innovative interactions such as voice and artificial intelligence. " Lei Jun said.

　　The combination of AI and IoT Internet of Things platform forms AIoT (abbreviation of AI and IOT, intelligent interconnection of all things), which is the next generation of super Internet, bringing super opportunities several orders of magnitude larger than the mobile Internet. Lei Jun firmly believes that it will become the most important driving engine of the digital economy.

　　Li Yanhong: Artificial intelligence is the main course. If you don’t eat it, you will lose an era.

　　"In the past year, artificial intelligence has become a social consensus." In August this year, Li Yanhong said in his speech at China International Intelligent Industry Expo, "In the past, everyone paid more attention to artificial intelligence and defeated the world Go champion. Today, we are more concerned about what convenience artificial intelligence has brought to people’s lives and how much efficiency it has improved people’s work. In the past, we may have paid attention to a driverless car running thousands of kilometers without human intervention. Today, we may be more concerned about how driverless driving can truly achieve safety, how to reduce costs, and how to run on the open road in a low-speed environment. "

　　Li yanhong believes that the internet is a starter, and its characteristic is fast; Artificial intelligence is the main course, which needs to be simmered slowly, but it is nutritious. In the future, no enterprise can claim that it has nothing to do with artificial intelligence. If you can’t eat this main course, you will lose an era.

　　Ding Lei: The digital economy solves the problems of efficiency and content.

　　What problems has the digital economy solved? In Ding Lei’s view, it is mainly manifested in two points: one is efficiency, and the other is content.

　　Ding Lei further explained that the efficiency of e-mail, search engine, e-commerce or payment system has been improved. In addition, the development of digital economy also meets the needs of consumers for different content positioning. "For example, with Netease Cloud Music, many independent musicians no longer need to distribute their works through record companies, but can directly publish their works on Netease Cloud Music."

[Autohome Ningbo Promotion Channel] Recently, we noticed that we are launching promotions in the Ningbo market. The maximum discount limit has reached 28,000, which has reduced the minimum starting price to 188,600 yuan. If you are interested in this model, you may wish to click the "Check the car price" link in the quotation form to get more discounts.

The front face of the EPi 008 has a unique and futuristic design, with a closed air intake grille, highlighting its identity as an electric model. The overall style is simple and atmospheric, with smooth lines and a sense of technology. The waist line design on the side of the body is dynamic, adding to the sense of power of the whole vehicle. The rear part is also simple, and the taillights are in a through design, which presents a unique light and shadow effect when lit.

eπ008车身尺寸为5002*1972*1732mm，轴距达到3025mm，车侧线条流畅，展现出大气磅礴的视觉效果。前后轮距均为1650mm，确保了车辆的稳定性和操控性。配备的265/45 R21轮胎规格与风格独特的轮圈相得益彰，进一步提升了车辆的运动感和辨识度。

eπ008的内饰风格以简约现代为主，车内采用了高级的皮质方向盘，支持手动上下和前后调节，确保驾驶员找到最舒适的位置。中控台搭载了一块15.6英寸的超大屏幕，集成了多媒体系统、导航、电话、空调等功能，并支持语音识别控制，让驾驶员操作更加便捷。此外，车内还配备了多个USB和Type-C接口，以及手机无线充电功能，为乘客提供了便利的充电体验。座椅方面，采用了高品质的仿皮材质，主副座椅均具备前后、靠背、高低调节功能，并且驾驶位座椅还配备了加热、通风和头枕扬声器，提升了乘坐舒适度。电动座椅记忆功能则允许驾驶员和乘客根据个人偏好保存座椅位置，进一步增加了使用的便利性。第二排座椅同样支持前后、靠背和腿托调节，后排座椅还支持比例放倒，进一步扩大了车内空间的灵活性。

eπ008搭载了一台1.5T 147马力的L4发动机，最大功率达到108kW，峰值扭矩为210N·m。匹配电动车单速变速箱，为驾驶者带来高效且平稳的动力输出体验。

根据汽车之家车主的评价，eπ008在车内空间、驾驶感和动力方面表现出色，外观设计也令人满意。车主表示：“车内空间大，驾驶感高，动力可以，外观大气。”这些优点使得eπ008成为了一款值得推荐的车型。

As long as you are not Takumi Fujiwara, in fact, most of the vehicle power is enough for your daily use. The competition in the automotive market is still very fierce, and today’s editor brings it. Let’s take a look at it next.

Let’s take a look at the appearance of the Mercedes-Benz GLE AMG first. The front face of the Mercedes-Benz GLE AMG looks more dynamic and lively, with a very sporty atmosphere. With clean headlights, the visual impact is full. The car is equipped with LED daytime running lights, automatic opening and closing, adaptive far and near light, delayed closing, etc. Come to the side of the car, the body size of the car is 4947MM*2015MM*1782MM, the car adopts spiritual lines, the side circumference looks very delicate, with large-sized thick-walled tires, it looks sporty. On the rear design, the overall shape of the Mercedes-Benz GLE AMG echoes the front face, the taillights show a tough design style, and the unique exhaust pipe, the overall shape is still very durable.

When you come to the Mercedes-Benz GLE AMG, the interior style is very tough, and the overall design atmosphere is still relatively in place. The steering wheel of the car is well designed, equipped with electric up and down + front and rear adjustment, steering wheel memory, and other functions, which make people love it. Let’s take a look at the central control. The design of the center console is reasonable, which makes the interior design quite layered. The overall design of the central control is very good. The dashboard and seats also feel good. Let’s take a look. The car is equipped with a fashionable and atmospheric dashboard, highlighting the trendy temperament. The car adopts leather seats, which are wide and thick, and the materials are exquisite, making the ride comfortable.

Look at the configuration, Mercedes-Benz GLE AMG equipped with vehicles to everything, driving mode selection, remote key, rear wipers, interior ambient lights and other configurations.

This car has already been introduced, and I believe that many users who buy a car value its comfort and practicality. If you plan to buy a car, consider it.

[Autohome Zhengzhou Discount Promotion Channel] Good news! The Zhengzhou market is setting off a grand discount storm, bringing unprecedented benefits to consumers. At present, Jaguar XFL is conducting an unprecedented promotion, with a maximum discount of 162,200 yuan, making the original starting price 249,900 instantly more accessible to the people. Friends who want to seize this price reduction opportunity, don’t miss it, click "Check the car price" in the quotation form, act immediately, and strive for more preferential space on the price.

The exterior design of the Jaguar XFL shows the perfect blend of elegance and power. The front face features the iconic Leopard air intake grille, which is unique and eye-catching. With streamlined body lines, it creates a dynamic and luxurious visual effect. The overall style is both sporty and business-like. The proportions of the body are coordinated, and the details are exquisite craftsmanship, which brings a strong visual impact to the driver and bystanders.

The Jaguar XFL’s elegant side lines outline a smooth body profile, the body size reaches 5102mm*1890mm*1456mm, and the wheelbase is up to 3100mm, ensuring a spacious interior space. The front wheelbase is 1605mm and the rear wheelbase is 1609mm, showing a solid chassis layout. The tire specifications are unique. The front wheel is equipped with 245/40 R19 tires, and the rear wheel is of the same specification. With the exquisite wheel design, it not only enhances the driving stability, but also adds the sense of mobility and luxury of the vehicle.

The interior design of the Jaguar XFL fully demonstrates the perfect fusion of British luxury and modern technology. In the spacious cockpit, the steering wheel is made of exquisite leather material, which not only feels delicate to the touch, but also provides manual and electric adjustment to ensure driver comfort and convenience. The 11.4-inch central control screen stands in the center, not only displays clearly, but also supports multimedia systems, navigation and automatic speech recognition control of the phone, providing the driver with an intelligent operation experience.

In terms of seats, the Jaguar XFL is made of luxury leather, and the seats can be adjusted in multiple directions, including front and rear, backrest, height and waist support, to ensure a personalized ride experience for passengers. The front seats are equipped with heating function, which takes into account functionality and comfort. The driver’s seat also has a power seat memory function to provide personalized settings for the driver. The overall interior design is delicate and elegant, taking into account practicality and luxury, aiming to bring passengers a distinguished in-car enjoyment.

The Jaguar XFL is powered by a 2.0T turbocharged engine with a maximum power of 184 kilowatts and a maximum torque of 365 Nm. The engine has 250 horsepower and is paired with an 8-speed automatic transmission, ensuring a smooth driving experience and efficient performance output.

In general, Autohome owners are full of praise for the exterior design of the Jaguar XFL, believing that its young and fashionable style is very eye-catching, like a cheetah ready to go. The owner’s satisfaction expression undoubtedly adds more charm and value to this luxury car. Whether it is on the city street or on the suburban road, the Jaguar XFL can attract people’s attention with its unique appearance, becoming the best embodiment of the owner’s taste and personality.

The Autohome Fuzhou Promotion Channel brings you the latest good news. The much-watched models are undergoing an unprecedented price reduction promotion in Fuzhou. It is understood that car buyers can currently enjoy up to 30,000 cash discounts, making the already cost-effective Beijing BJ60 more attractive in the Fuzhou market. The starting price has been reduced to 209,800, which undoubtedly provides consumers with better car purchase options. To seize this opportunity to get more detailed discount information and real-time pickup prices, please click the "Check Car Price" button in the quotation form to make the benefits at your fingertips.

The exterior design of the Beijing BJ60 is full of power and exquisite details. Its front face is uniquely designed, with a large area of chrome-plated grille, which is like the tusks of a beast, showing a powerful and mighty temperament. The grid-like design of the air intake grille not only enhances the visual impact of the vehicle, but also optimizes the aerodynamic performance. The body lines are smooth, and the overall style combines the dual elements of hard off-road and modern urban, showing the unique design language of the BJ60. The body proportions are coordinated, the roof lines are flat, and the tail design is simple and powerful, all of which reflect the extraordinary aura of the BJ60.

Beijing BJ60 outlines a tough body profile with elegant side lines. Its body size is 5040mm x 1955mm x 1925mm, and the wheelbase reaches 2820mm, making the body proportionally coordinated and spacious. The front and rear wheel tracks are 1620mm and 1640mm respectively, ensuring good driving stability. In terms of tire specifications, the front and rear are equipped with 265/65 R18 tires, which are combined with the delicate wheel design, not only strengthen the visual effect, but also provide a solid grip.

The interior design of the Beijing BJ60 is luxurious and exquisite, dominated by the classic Nordic style, creating a spacious and comfortable driving space. The steering wheel is made of genuine leather, which feels delicate and supports manual up, down and back adjustment to ensure that the driver can find the ideal position in different driving conditions. The 12.8-inch large-size central control screen stands on the center console, which not only displays clear information, but also has an automatic speech recognition control system, which is convenient for the driver to operate multimedia functions.

In the seat part, the seat made of imitation leather is comfortable to sit on. The main driver’s seat provides functions such as front and rear adjustment, backrest adjustment, high and low adjustment (4 directions), leg rest adjustment and waist support (4 directions). It supports heating, ventilation and massage, making long-distance driving more comfortable. The driver’s seat also has a power seat memory function, which adds convenience and personalized experience. The passenger seat also has a variety of adjustment functions, including front and rear, backrest, high and low adjustment (2 directions) and waist support (4 directions). The second row of seats supports backrest adjustment and has high space utilization, while the rear seats are designed with a proportional reclining design, providing flexible loading space. The overall interior design fully considers humanization and practicality, and aims to provide users with an excellent riding experience.

For the Beijing BJ60 model, it is equipped with a 2.0T turbocharged engine with a maximum power of 120 kilowatts, equivalent to 163 horsepower, providing a strong power output. This engine is matched with an 8-speed automatic transmission, ensuring a smooth driving experience and good fuel economy. The maximum torque is 400 Nm, providing ample torque support for the vehicle, whether it is urban driving or off-road scenarios can be easily handled.

Among the many choices, the Autohome owner finally chose the Beijing BJ60, which won his favor with its spacious interior space, strong power output and satisfactory exterior design. The owner particularly emphasized the excellent off-road performance of the BJ60, whether it is snowy mountain roads or complex road conditions, it can be easily handled, and it has become the focus of attention during driving. In addition, he is also very satisfied with the after-sales services of the 4S shop, and the problems can be solved in time, which undoubtedly increases his trust and satisfaction in the Beijing BJ60. To sum up, the Beijing BJ60 has become the ideal car choice for car owners with its high cost performance and excellent performance.

On September 26, the medium-sized SUV was officially launched, and the new car launched a total of 6 models, of which the price range of the extended version is 21.99-27 9,900 yuan, and the price range of the pure electric version is 22.99-28 9,900 yuan. As the third model of Avita, Avita 07 provides two kinds of power, extended range and pure electricity, equipped with Ningde Times Shenxing super-charged battery, and equipped with Huawei Hongmeng smart cockpit and Huawei Dry Smart Driving ADS3.0.

In terms of appearance, Avita 07 continues the family-style "Future Elegance" design concept: split headlights and double C-shaped LED daytime running lights. The disc-wing front face design is inspired by the silhouette of space vehicles, and the C-shaped light groups on both sides embody Avita’s most conspicuous logo. In addition, the new car offers five colors of star purple, crystal green, white, gravel black and rock gray.

In terms of size, the length, width and height of the Avita 07 are 4825mm × 1980mm × 1620mm, and the wheelbase is 2940mm. The side of the body is a bezel-less door and a hidden door handle. Secondly, the Avita 07 can be equipped with an optional electronic exterior rearview mirror to solve the pain point of the traditional exterior rearview mirror at night and at night. Cover plates are also arranged on both sides of the tail, and it is equipped with rear privacy windows and a panoramic canopy.

The cabin adopts a surrounding four-screen layout design: 35.4-inch 4K remote hairtail screen and 15.6-inch floating central control screen, as well as 6.7-inch high definition electronic rearview mirror dual display. In terms of configuration, Avita 07 is equipped with HarmonyOS Hongmeng smart cockpit, which connects the mobile phone and the car to realize the interconnection of the driver, and the information of the mobile end and the car end can flow to each other.

The interior color scheme adopts "contrasting color" design, the seats are made of vegetable tanned pearlescent NAPPA leather environmentally friendly material, and the instrument panel, the door panel and B pillar of the whole car are made of a large area of PU material soft package, which gives the whole car a good sense of luxury.

Secondly, the front main and co-pilot both provide zero-gravity seat functions, which support ventilation, heating, massage, and leg support, and the configuration is all full; the rear row also supports ventilation and heating, and the middle is also equipped with an armrest screen for adjustment. In addition, Avita 07 also adds electric sunshades to provide passengers with a more comfortable experience.

Avita 07 is equipped with Huawei Dry ADS 3.0 high-order intelligent driving system, with end-to-end high-order intelligent driving functions. 27 high-perception intelligent driving sensors, including Huawei’s latest 192-line lidar, provide accurate sensing capabilities. Through leading software and hardware coordination, users can experience parking space-to-parking intelligent driving. It has functions such as full-scene intelligent driving, parking space-to-parking space, parking-to-parking VPD, parking from the car, remote moving, and omnidirectional active safety.

In terms of power performance, Avita 07 offers both extended range and pure electric versions. The extended range model is first equipped with Kunlun intelligent range extension technology, equipped with 1.5T range extender, with a maximum power of 115 kW, of which the two-wheel drive version is equipped with a maximum power of 231 kW drive motor; the four-wheel drive version is equipped with a dual motor system of 131 kW before and 231 kW after, with a comprehensive power of 362 kW. In terms of battery life, it is equipped with Ningde Shenxing hybrid battery, which supports up to 3C fast charging, and the power takes only 15 minutes from 30% to 80%. The two-wheel drive pure electric cruising range is 188 kilometers, and the four-wheel drive pure electric cruising range is 178 kilometers.

The pure electric version is based on the 800V high voltage architecture, providing two-wheel drive and four-wheel drive models. The two-wheel drive version has a maximum power of 252 kW; the four-wheel drive version is equipped with a dual motor system of 188 kW in the front and 252 kW in the back, 440 kW, and the maximum speed is 200km/h. In terms of battery life, equipped with the CATL Shenxing supercharged battery, the CLTC pure electric cruising range is 650 kilometers and 610 kilometers respectively.

The Avita 07 equipped with Kunlun Extended Range Hybrid is able to accelerate for 4.9 seconds and feed for 5.8 seconds at full power, capable of OurHours full output, and the feed attenuation performance shows the strongest in its class.

In addition, the Avita 07 is also equipped with a Taihang intelligent control chassis, which can scan the road conditions ahead through sensors such as lidar in advance, so as to adjust the suspension in real time and isolate the vibration as much as possible when passing through the bumpy road; in sports mode, the chassis will automatically adjust to provide better lateral support, effectively relieving the "boat feeling" of the vehicle.

Avita 07 is on sale at 219,900 price, its market positioning is more accurate, and it meets consumers’ needs for comfort and practicality in terms of configuration and appearance. At the same time, it also shows a certain competitiveness in price. And the first Kunlun Smart Range Extended Edition, its listing means that it will affect the future market of Avita brand 11, 12 and other competitors. Compared with the first two models, its launch will undoubtedly be a competitive weight for the Avita brand in the new energy market. Let’s look forward to its future performance.

　　[car home new car listed] On February 19th, we learned from BYD official that its compact car-Qin PLUS Glory Edition was officially launched, among which DM-i models were launched in five configurations, with the price range of 79,800-12,580 yuan; There are five configurations for EV models, and the price range is 10.98-13.98 million yuan.. At the same time, the official also announced a number of concessions. It is worth mentioning that (|) Glory Edition has added white glaze and green appearance color matching, upgraded intelligent voice continuous call, and upgraded intelligent power on and off for all departments. For the detailed price of the new car, please see the figure below:

　　In terms of appearance, the new car adds white glaze and green color matching, which is in line with the existing design style as a whole and looks more advanced as a whole. Specifically, the new car uses a larger "dragon mouth" front grille and internal "dragon armor" elements to bring strong sensory impact. At the same time, the heavy downward pressure of the front of the car and the four three-dimensional lines on the hood of the engine combine to create a visual effect of diving. It is worth mentioning that the EV model is different from the DM-i model in the front grille, which improves the recognition.

　　The car uses a penetrating taillight, the outer shell of the lamp group is blackened, and the interior uses LED light source. Above the taillights, there is also a "Build Your Dreams" trailer with the latest design font.

　　　Qin PLUS Glory DM-i is equipped with a DM-i plug-in hybrid system consisting of a 1.5L engine and a permanent magnet synchronous drive motor, in which the maximum power of the engine is 81 kW and the maximum torque is 135 Nm. In terms of driving motor, two power versions are provided according to different models, with the maximum power of 132 kW and 145 kW respectively and the maximum torque of 316 Nm and 325 Nm respectively. In terms of battery, the new car will be equipped with DM-i super hybrid special power blade battery pack, and its NEDC comprehensive pure electric cruising range is 55km and 120km respectively.

　　Qin PLUS Glory EV is equipped with a permanent magnet synchronous drive motor with a maximum power of 100 kW and a peak torque of 180 Nm. In terms of battery, it is equipped with 48kWh and 57.6kWh battery packs according to different configurations, corresponding to cruising range of 420 km and 510 km. (Text/car home Zhouyi)